Enter Button
Press Enter to:
•
Confirm selection
•
Save changes
In the RSD1 Menu, a check mark
in the lower right corner of the display indicates that pressing Enter accesses a
submenu.
Press Enter to save changes. New values flash rapidly, and the sensor returns to the parent menu.
Escape Button
Press and hold Escape for 4 seconds to:
•
Access the RSD1 Menu while in Run mode
Press Escape to:
•
Leave the current menu and return to the parent menu
Important: Pressing Escape discards any unsaved programming changes.
In the RSD1 Menu, a return arrow in the upper left corner of the display indicates that pressing Escape returns to the
parent menu.
Press and hold Escape for 2 seconds to return to Run mode from the RSD1 Menu.
Programming a Sensor with the RSD1
When connected to a sensor and in Run Mode, the RSD1 mirrors the connected sensor's display. Program a sensor using the
buttons on the RSD1.
For sensor programming information, reference the literature specific to the connected sensor.
For more information on the options available in each RSD1 menu, reference the Instruction Manual (199621).
In addition to programming a connected sensor, the RSD1 buttons can be disabled to prevent unauthorized or accidental
programming changes. See the Instruction Manual for more information.
Wiring Diagrams
The following wiring diagrams are examples of different RSD1 outputs. Wiring is dependent on the sensor connected to the
RSD1.
Dual Discrete
3
1
4
5
shield
2
+
12–30 V dc
D1_Out
D2_Out
Input
−
Load
NPN
PNP
* User-configurable PNP/NPN setting
Load
or
Discrete Analog (Current)
shield
+
12-30V dc
D_Out
A_Out
Input
–
Load
* User-configurable PNP/NPN setting
4-20 mA
3
1
2
4
5
NPN
or
PNP
Discrete Analog (Voltage)
shield
+
12-30V dc
D_Out
A_Out
Input
–
Load
* User-configurable PNP/NPN setting
3
1
2
4
5
NPN
or
PNP
0-10V
Note: When connecting a 5-pin sensors to the RSD1, a double-ended 5-pin to 5-pin cordset is optional.
When connecting a 4-pin sensor to the RSD1, a double-ended 4-pin to 5-pin adapter cordset is required.
RSD1 Remote Display
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 199622 Rev. B
