P/N 56910COA
19
Maintenance
Banner Engineering Corp.
• Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Cleaning the System
Regularly remove any dust or dirt from the sensor using a soft cloth.
Cleaning the Lens
Regularly remove any dust, dirt, or fingerprints from the sensor’s lens.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off
remaining debris. Do not use any other chemicals for cleaning.
Cleaning the Light Source
Regularly remove any dust, dirt, or fingerprints from the light source. Follow the
manufacturer’s directions for cleaning.
1. Blow off dust using anti-static compressed air.
2. If necessary, and if allowed by the manufacturer for the light source used,
turn the light source off and allow it to cool down, then use a lens cloth and
lens cleaner or window cleaner to wipe off remaining debris. Do not use any
other chemicals for cleaning.
56910 (presplus sensor)C0A 8/16/03 11:33 PM Page 19
