MINI-BEAM
®
Expert
™
Series – DC Voltage
Specifications
Supply Voltage and Current
10 to 30V dc (10% max. ripple) at less than 45 mA, exclusive of load
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Output Configuration
Bipolar:
One current sourcing (PNP) and one current sinking (NPN) open-
collector transistor
Output Rating
150 mA max. each output at 25° C, derated to 100 mA at 70° C
(derate ≈1 mA per °C)
Off-state leakage current:
less than 5µA @ 30V dc
ON-state saturation current:
less than 1V @ 10 mA; less than
1.5V @ 150 mA
Output Protection Circuitry
Protected against false pulse on power-up and continuous overload or short-
circuit of outputs
Output Response Time
Sensors will respond to either a “light” or a “dark” signal of 500 µs or longer
duration, 1 kHz max.
NOTE: 1 second delay on power-up; outputs do not conduct during this time.
Repeatability
100 microseconds (all models)
Construction
Reinforced thermoplastic polyester housing, totally encapsulated,
o-ring seal, acrylic lenses, and stainless steel screws.
Environmental Rating
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12, and 13; IEC IP67
Connections
PVC-jacketed 5-conductor 2 m (6.5') or 9 m (30') unterminated cable, or 5-pin
Euro-style quick-disconnect (QD) fitting are available. QD cables are ordered
separately.
Operating Conditions
Temperature:
–20° to +70° C (–4° to +158° F)
Max. rel. humidity:
90% at 50° C (non-condensing)
