2.2 ISM Radio Board (Modbus Slave ID 1)
The ISM radio board may be a MultiHop radio (DX80DR*M-HE5) or a Performance Gateway radio (DX80G*M2S-PE5). Refer
to the model number label on the DXM100 Controller and the model number table to identify the ISM radio type.
5
1
ON
ON
A
D1
B
C
D2
2
3
4
6
7
8
The ISM radio should be plugged into the I/O base board
with the U.FL antenna connector closest to the SMA
connectors.
A - Antenna connector
B - Button
C - LED
D1 and D2 - DIP switches
2.2 MultiHop (HE5) DIP Switch Settings
Switches
Device Settings
1
2
3
4
5
6
7
8
Serial line baud rate 19200 OR User defined receiver
slots
OFF*
OFF*
Serial line baud rate 38400 OR 32 receiver slots
OFF
ON
Serial line baud rate 9600 OR 128 receiver slots
ON
OFF
Serial line baud rate Custom OR 4 receiver slots
ON
ON
Parity: None
OFF*
OFF*
Parity: Even
OFF
ON
Parity: Odd
ON
OFF
Disable serial (low power mode) and enable the
receiver slots select for switches 1-2
ON
ON
Transmit power
900 MHz radios: 1.00 Watt (30 dBm)
2.4 GHz radios: 0.065 Watts (18 dBm) and 60 ms
frame
OFF*
Transmit power
900 MHz radios: 0.25 Watts (24 dBm)
2.4 GHz radios: 0.065 Watts (18 dBm) and 40 ms
frame
ON
Application mode: Modbus
OFF*
Application mode: Transparent
ON
DXM100 Controller Instruction Manual
www.bannerengineering.com - Tel: 763.544.3164
7
