Banner American Easy-Lam II, Operating Instructions Manual

Page: 5 / 19

5
INTRODUCTION
Congratulations on your purchase of the Easy-Lam II Roll Laminator. This unit is designed
to provide years of trouble-free service.
The Easy-Lam II will accept rolls of laminating film up to 27” wide in both 1.5 and 3 mil
thicknesses. Paper and card stock up to 1/16” (1.6mm) thick may be laminated without
adjusting the feed rollers.
The Easy-Lam II will accept 5 mil film if the machine was purchased with the 5 mil switch or
variable speed only!
Your Easy-Lam II is preset at the factory for most applications, so any adjustments should be
minor. A thermometer provides continual indication of the heat shoe temperature, which may
be adjusted as needed.
SPECIFICATIONS
Plastic Width Up to 27” (68.6cm)
Plastic Thickness 1.5 mil and 3 mil (37 and 75 micron).
5 mil (125 micron) with 5 mil option switch
only.
Maximum Roll Length 1.5 mil – 1,000 feet (304.8 meters)
3 mil – 500 feet (152.4 meters)
5 mil – 250 feet (76.2 meters)
Speed 5 feet per minute (1.64m/minute)
Net Weight 91 lbs (41 kg)
Power Requirements 120VAC, 60Hz, 1840 watts (UL),
220VAC available