BANLAW PRODUCT DATA SHEET
RESTRACK ADVANCED CONTROLLER
Doc ID: PRH-FMG-21 Version: 1.0
Page
15
of
20
Please ensure you have the latest version of this document.
4.3.1
Fluid Delivery
–
Direct To Storage
Liquid deliveries may be transferred from the tanker into the specified storage area by:
A.
inwards flow-meter situations recording the liquid quantity, OR
B.
non-metered situations where the quantity will be recorded on the delivery manifest for later
manual entry into the Banlaw Restrack system.
In situation A. above the ResTrack Advanced Controller will record the fluid being delivered into the storage
area by the delivery operator as part of the fluid transfer process. These delivery transactions will not show
any User ID or Fleet information but the date, time and quantity will be recorded by the flow meter for the
targeted storage area.
5.
MAINTENANCE AND SPARE PARTS
Banlaw product warranty is void in the event:
• Non
-genuine spare parts are used for product repair/servicing.
• Repairs are carried out by unauthorised personnel.
• Any attempt is made to repair/service a product deemed as non
-serviceable by Banlaw.
• Products are subjected to abuse, tampering, neglect, or improper operation a
nd maintenance.
• As per the terms and conditions of Banlaw product warranty –
refer Section 8.
The following genuine Banlaw spare parts are available to suit the ResTrack Advance Controller:
BANLAW PART NO.
DESCRIPTION
000640
Power Supply UPS, input 24V, output 12,24
000747
12V Battery, 2x3 Shrink Wrap
000635
Industrial Computer
000638
Touch Screen
BFTFTP
FTP (Fluid Transfer Point)card
001061 (non US model)
000606 (US Model)
Communications Interface
–
Maestro module
000379
HART Gateway
–
HG1+
000744
Ethernet Industrial Switch
BFT158(Card reader) +
BFTE162(Cover) +
BFTE211A(Cover assembly) +
BFTEG2(Gasket)
HID Card reader system
000666
iButton identifier system
000586
Enclosure 620 x 450 x 215 SS 304
To maintain the safety, performance and reliability of Banlaw products:
•
Only genuine Banlaw spare parts are to be used.
•
Products should not be tampered with or modified in any manner not endorsed by
Banlaw.
