1.Marking the Door
1.1.
Mark the fixing point on the edge of your door
at the desired height.(Figure 1)
1.2
Affix the template below on the door.(Figure 2)
1.3
Cut the cavity of the semi-circle using your
preferred method.(Figure 3)
1.4
Apply your preferred adhesive and fit to cut out.
(Figure 3)
Figure 1
Figure 2
Figure 3
Not Included
Included
1. Cavity Pull
IMPORTANT:
Please install this hardware in the following order to ensure
its warranty is not voided.
1. Install the hardware on raw/unfinished door using the
instructions provided.
2. Remove hardware (where possible) and store safely. Do
not place tape onto the hardware as this will damage the
finish.
3. Paint / finish door.
4. Reinstall hardware.
