CONTACTLESS CARD READER MERCHANT OPERATING GUIDE
GETTING STARTED
PC-EFTPOS I5100 TERMINALS
7
3.2.2 Connecting to the PC-EFTPOS i5100 Terminal using Standalone
Lite
Mode.
a. Remove the cable management clip on the base of the EFTPOS terminal
as shown.
Plug
It
Cable Management Clip
b. Refer to the PC-EFTPOS i5100 Merchant Operating Guide for information regarding
installation and connection of the terminal.
c. If the RS232 serial cable is connected to the base of the terminal, remove it from
the RS232-1 port. Insert this same RS232 serial cable into the RS232 serial port
on the contactless detachable connecting cable (Arm 3). (Note: The RS232 serial
cable may or may not be connected, when the terminal is using standadalone lite
mode).
Base of i5100 terminal
RS232-1
RS232-2
Power
d. Insert the RJ12 connector (COM 1) on the contactless detachable connecting
cable (Arm 1), into the RS232-1 port on the base of the terminal.
