banks iDash 1.8, Ownersmanual, Page: 11 / 16

97670 v.2
11
3.8: Link G4
Wiring Setup:
Refer to
Figure 3-13
to
ensure the CAN Hi & Lo pins are in the
correct location.
Figure 3-13
iDash Setup:
Menu -> Settings ->
Vehicle Selection -> Aftermarket ECU
-> Link G4+ (1000)
Software Setup:
ECU Controls ->
CAN Setup (See Figure 3-14)
• Select desired module to be used and
select the “
User Defined
” mode.
• Set the Bit Rate to 1 Mbit/s, and then
select a spare CAN channel
• From the drop-down mode list, select
“
Transmit Generic Dash
”.
• Set the CAN ID to 1000, and set the
Format to “ Normal ”.
• Change the Transmit Rate to
20hz
, hit
Apply
, and then
OK
.
See Figure 3-15
• Make sure to store these setting
by hitting F4
ECU CAN Hi Pin CAN Lo Pin
Atom 11 28 29
Storm (Black) B27 B28
Fury B27 B28
Xtreme B29 B28
Thunder D24 D25
Farce GDI B27 B28
Kurofune JST3 JST2
Monsoon 28 29
PlugIn ECUs Comms 3 Comms 4
Figure 3-14
Figure 3-15
Section 3:
ECU CONFIGURATION