Page 13
For technical questions, please call 1-888-866-5797.
Item 64268
S
AFET
y
Op
ERA
TION
M
AINTENAN
c
E
S
ETU
p
General Operating Instructions
This Tool DOES NOT use a Workpiece contact.
Caution must be used whenever this Tool is connected to an air supply.
If the Tool is dropped, or if the Head Cap is accidentally struck, then the Tool will discharge a fastener,
potentially causing
SEVERE pERSONAL INJURy.
1. If an automatic oiler is not used, add
a few drops of Pneumatic Tool Oil to the airline
connection before use. Add a few drops
more after each hour of continual use.
WARNING! TO pREVENT SERIOUS INJURy:
Keep your feet away from Tool discharge area.
Tool applies extreme force to fastener, and fasteners
may deflect or discharge in an unexpected direction.
2. Hold the Arm securely and press the
Spacer against the work surface,
making sure the Spacer is in position.
3. Press down hard so that the Spacer is
firmly contacting the work surface.
4. Using the Hammer, strike the Head Cap firmly
to drive the fastener into the work surface.
5. Position the Tool for the next fastener and
repeat the process until the job is completed.
Hammer
Spacer
Head
cap
Wood
Subfloor
Board Being
Installed
previously
Installed
Boards
6. If the Tool requires more force to accomplish
the task, verify that the Tool receives sufficient,
unobstructed airflow (CFM) and increase the
pressure (PSI) output of the regulator up to the
maximum air pressure rating of this Tool.
cAUTION! TO pREVENT INJURy
FROM TOOL FAILURE:
Do not exceed the Tool’s
maximum air pressure rating.
If the Tool still does not have sufficient force
at maximum pressure and sufficient airflow,
then a larger Tool may be required.
7.
After use, to prevent accidents:
a.
Detach the air supply.
b.
Empty the Magazine.
c.
Attempt to discharge the Tool into a piece of
scrap wood to ensure that it is disconnected
and is incapable of driving any fasteners.
d.
clean and oil the Blade Guide and Magazine.
clean external surfaces with clean, dry cloth.
e.
Store indoors out of children’s reach.
