Dry-Mate
Dry
Disconnects
5
Step 3
In this position, the handle of the Female must be rotated before the handle of the Male can rotate. Rotate the handle of the Female
to the fully open position. When the female handle is fully opened, the locking yoke will engage the clamp arms and prevent the clamp
arms from being opened while the handle is in the fully open position. The handles should now be oriented as shown in Figure 3.
Step 4
After the handle of the Female has been fully opened, the handle of the Male can be rotated. Rotate the handle of the Male to the fully
open position. The assembly is now opened and flow may begin. When both valves are fully opened the handles should be oriented as
shown in Figure 4.
To close the valves and disconnect the couplers, reverse steps 1 through 4.
Male
Female
Cam Arm
Cam Arm
Male
Female
Clamp Arm
Clamp Arm
!
WARNING!
As the handle of the Female is being closed and before the handle is fully closed, the locking yoke that
prevents the cam arms from being opened will disengage.
Make sure that the handle on the Female is fully closed before opening the clamp arms.
If the clamp arms are opened before the handle of the Female is fully closed, liquid may spray or be dis-
charged, which may result in significant injury or death.
FIGURE 4
FIGURE 3
