Step 4: Fasten buckles over Velcro side opening and
the head support buckles. Adjust the head support
straps until baby’s back is snugly against your chest
Baby should not lean forward. (Notice: A smaller baby’s
arms should be positioned through the arm hole’s.
A bigger baby’s arms will rest comfortably over the side
of the head support.)
Step 5: While supporting baby’s weight with one hand,
pull on the end of webbing strap to adjust fit. Leg
opening must be adjusted to the smallest possible size.
Before releasing your hold on the baby,ensure that the
buckles are securely fastened.
Adjust the carrier until baby is high on your chest. You
should be able to easily kiss the top of your baby’s
head.
A smaller baby’s arms should be positioned through
the arm hole’s(see instruction). A bigger baby’s arms
will rest comfortably over the side of the head support.
If baby falls asleep, turn baby’s face to the side to
provide an unobstructed source of air. Failure to
comply may cause a potential suffocation hazard.
There should always be room between baby’s face and
your chest to provide a clear source of air.
IMPORTANT
WARNING