ENG
Assembling Procedures
4. Open the baby walker frame in the in-use position, ensuring that all wheels touch the floor. Slowly raise
the tray by polling it in an upward direction, until a click indicates that the frame has been locked
correctly in one of the three positions.
Step 5
Step 4
Step 6
6. Insert the plastic rings of the padded seat in the slots located along the upper edge of the walker frame.
Pass the rings through the slots and tug them until they clear the passage, then release them, ensuring
that they are correctly locked in the position and cannot recede into the slot.
5. Aim at the hole on the side of upbase, push the pin into the hole, you may adjust the pin right or left a bit
to make sure it fully get through the hole. Rest wheels repeat same operation.
4. Open the baby walker frame in the in-use position, ensuring that all wheels touch the floor.
Slowly raise the tray by polling it in an upward direction, until a click indicates that the frame has
been locked correctly in one of the three positions.
6. Insert the plastic rings of the padded seat in the slots located along the upper edge of the
walker frame. Pass the rings through the slots and tug them until they clear the passage, then
release them, ensuring that they are correctly locked in the position and cannot recede into the slot.
5. Aim at the hole on the side of upbase, push the pin into the hole, you may adjust the pin right or
left a bit to make sure it fully get through the hole. Rest wheels repeat same operation.
17
