3 How to use
Step 4: Collect your urine in the cup included in the package. Dip
the top of the test strip into the urine and hold it until you hear a
"beep" (at the same time, the status light starts fast flashing). Then
pull it out and put the test strip lid back on.
Step 5: Place the product on a flat surface. The LED light will be
flashing during the testing. Wait for about 6-10 minutes till you hear
three beeps which indicate that the test is completed. The test
result will be displayed via the LED light. If the light goes out after
some time, pulling out the test strip, or putting back & pulling out
the main body lid again will enable the last test result to show
again.
6-10min
4
5
