The illustration to the left shows how to pause
and replay an ongoing programme. You can see
the state of the ongoing program, what is saved
in the replay buffer, what to press on Beo4 and
what appears on your television. The sequence is
described in detail below:
A…
You want to watch a TV programme, but
want to make sure that you see the whole thing.
You switch on the television and the hard disc
recorder by pressing
V MEM
* and the red
button on Beo4. The last program viewed
appears on the screen, and the hard disc
recorder begins saving the programme in the
replay buffer.
B…
You decide to take a break, but do not want
to miss the programme. You press
STOP
to
pause the programme. A status bar on the
screen tells you how long the hard disc recorder
has been saving to the replay buffer (fi ve
minutes) and how old the current picture is
compared to the ongoing programme (one
minute behind the live signal).
C…
You come back to the television and press
GO
to play what you have missed during the break.
If you want to cue forward, perhaps to skip a
commercial, simply press .
D…
You decide to return to the ongoing TV
programme and press
V MEM
and the red
button to do so.
Pause and replay an ongoing
programme
If you wish to pause and replay ongoing TV
programmes, you must watch TV using
V.TUNER – the TV tuner built into the hard
disc recorder. If you wish to pause and replay
STB programmes, you must connect the set-
top box to the hard disc recorder and switch
on the set-top box via an on-screen menu.
For further information about how to switch on
V.TUNER or a connected set-top box, refer to page
10.
B
A
C
D
V.MEM
STOP
GO
V.MEM
- 1:24
PAUSE
-0:01
- 3:24
PLAY
-1:00
- 0:05
PAUSE
- 0:01
- 0:08
REPLAY
- 0:04
5
Summary of Contents for HDR 1
