manualshive.com logo in svg

Bang & Olufsen Celestial BOC60 Series, Installation Manual

Share
Download
Bang & Olufsen Celestial BOC60 Series Installation Manual Download Page 11

9

Aimable

The woofer (BOC66 only) and tweeter can be pivoted to direct the sound towards 

the listening area. Or for a more diffused surround sound experience, the rear 

speakers can be aimed towards the wall. To aim the tweeter, gently apply pres-

sure to the rim with your thumbs to pivot the tweeter. To aim the woofer (BOC66 

only), gently apply pressure to the rim and pivot it in the desired direction. Subject 

to which speaker is being used, there are two switches: one to adjust the treble, 

and one to adjust the bass. Depending on the area the speaker will be installed, 

bass and treble are affected by its surroundings. When the room has a lot of hard 

surfaces bass & treble are bounced and reflected through the room, if the room 

has softer surfaces the bass & treble are absorbed. Adjust for the desired acoustic 

balance for each room.

6. Testing & Adjustments

Fit the grille over the speaker. The grille uses magnets to be held in place. 

7. Installing the Grille

Summary of Contents for Celestial BOC60 Series

















Reviews:

No comments

Brands by name

Popular brands

Load more brands