manualshive.com logo in svg

Bang & Olufsen Celestial BOC100 Series, Installation Manual

Share
Download
Bang & Olufsen Celestial BOC100 Series Installation Manual Download Page 10

8

5. Installing the Speaker

Push down to open the connector. 

Insert the wires into the connectors, 

making sure that the positive wire is 

being attached to the red connection 

and the negative wire is being attached 

to the black connection. If the wires 

are switched, speaker performance 

will be drastically impacted.

4. Connecting the Wire

Speaker

Wire

Connector

STEP 1:

Fit the loudspeaker into the bayonet ring. Then twist the speaker about 15 de-

grees clockwise into place. When the loudspeaker is properly seated, the indica-

tors on the ring and the speaker will line up.

*Important* The indicators must line up to ensure the speaker is properly seated.

Twist Clockwise

to Lock

1. Fit into Ring

2. Twist into Ring

D109 install

SCALE:1:2

Origin Acoustics

6975 S Decatur Blvd

Suite 140

Las Vegas, NV 89118

844-ORIGIN1 (674-4461)

www.originacoustics.com

A  C  O  U  S  T  I  C  S

O R I G I N

®

Summary of Contents for Celestial BOC100 Series



















Reviews:

No comments

Brands by name

Popular brands

Load more brands