26
If you connect additional video
equipment to your television, you
must register the equipment in the
CONNECTIONS menu.
When the system is first set up, the
CONNECTIONS menu appears
automatically on the screen, so you
can register any equipment you may
have connected to your televison. If
you connect equipment at a later
date, on a permanent basis, then you
must register this equipment in the
CONNECTIONS menu.
For information about where and
how to connect extra equipment,
refer to the previous pages and the
chapter ‘
Socket panel’
on page 21.
Register additional video equipment
What is connected?
Registering the equipment connected to the
television enables you to activate it with the
Beo4 remote control.
> Press
TV
to switch on the television.
> Press
MENU
to bring up the TV SETUP menu.
> Press to highlight CONNECTIONS.
> Press
GO
to call up the CONNECTIONS menu.
> Press or to step between the different
sockets: AV1, AV2 and AV3.
> Press
GO
to be able to register a connected
product to the highlighted socket.
> Press or to move between the different
settings.
> Press or to register what you have
connected to the highlighted socket.
> Press
GO
to store the settings and be able to
select another AV socket.
> When you have completed your settings, press
STOP
to back up through previous menus or
press
EXIT
to exit all menus directly.
AV1
select
GO
SOURCE
V. MEM
IR SOCKET
NONE
HDMI
NO
Summary of Contents for BeoVision 8
