Bang & Olufsen BeoVision 7, Reference Book

Page: 16 / 64

Set up the television
For information about the connection
panels, refer to pages 20–22.
Never lift the television holding only the
front glass. The television is NOT designed to
stand on its own, it must be supported until
mounted on the chosen stand or bracket.
– Avoid placing your television in direct sunlight
or direct artificial light, such as a spotlight, as
this may reduce the sensitivity of the remote
control receiver. Also if the screen is overheated,
black spots may appear in the picture. These
spots disappear again, once the television cools
down to normal temperature.
– Make sure that the television is set up, placed
and connected in accordance with this Guide.
To prevent injury, use Bang & Olufsen stands or
wall brackets only.
– The television is developed for indoor use in dry,
domestic environments only. Use within a
temperature range of 10–0°C (0–10°F).
– Do not place any items on top of the television.
– Always place your television on a firm and
stable surface.
– Do not attempt to open the television. Leave
such operations to qualified service personnel.
Allow enough space below the screen for adequate
ventilation. Make sure not to cover the fans. If the
television is overheated a warning will appear on
the screen; switch the television to standby, not
off, in order for the television to cool down to
normal temperature.
If you have a motorised stand or a wall bracket,
leave enough space around the television to allow
it to turn and tilt freely.
Handling your television
1