Bang & Olufsen BeoVision 5, User Manual

Page: 8 / 47

8
You can extend your system into a
fully equipped Home theatre system
by connecting four Bang & Olufsen
loudspeakers and a BeoLab 2
subwoofer*.
When you switch on BeoVision 5 or
one of the sources connected to it,
the speakers which you may have in
a surround sound system can be cut
in or out, depending on what kind of
sound suits the source you are using.
BeoVision 5 may switch on a speaker
combination automatically. This
happens if e.g. a broadcasted
programme or DVD contains
information about the number of
speakers to be switched on. You are
still free to choose the speaker
combination you prefer.
You can also adjust the picture
dimensions to fill out the screen and
complete the Home theatre
experience.
Home theatre viewing with BeoVision 5
*NOTE! Refer to the BeoVision 5 CD-rom and
the chapter Loudspeaker setup – surround sound
for further information.
Select speakers for movie sound
While you are watching a movie or
programme, you can choose the speaker
combination you wish to switch on, provided
that the various sound modes are available in
your system.
Press repeatedly until SPEAKER is
shown in the Beo4 display
Press the number of the speaker
option you want. The speakers
selected will cut in automatically
If you want to adjust the sound
balance for the programme you
are watching, press
▲
or
▼
to
adjust the balance between the
external front and rear speakers,
and press
ss
or
tt
to adjust the
balance between the left and
right speakers
Press EXIT to remove SPEAKER
from the Beo4 display and to
return to the source you were
using
LIST
SPEAKER
1 – 5
▲
▼
ss tt
EXIT
Speaker combinations
SPEAKER 1
Sound in the television speakers only. For
programmes with dialogue, e.g. TV news.
SPEAKER 2
Stereo sound in the two external front speakers.
The BeoLab 2 subwoofer is active. For music
CDs.
SPEAKER 3
The television speakers, external front speakers
and the BeoLab 2 subwoofer are active. For TV
programmes in stereo.
SPEAKER 4
Enhanced stereo sound in the external front and
rear speakers. The BeoLab 2 subwoofer is
active. For music CDs or tapes.
SPEAKER 5
Surround sound from all speakers including the
BeoLab 2 subwoofer. For programmes encoded
in Surround Sound.
If you have connected only two external front
speakers to the television, you will only be able to
choose SPEAKER 1–3.