background image

Installation overview     5

Weight

When the TV is moved, a crane can be used (recommended). The items are too heavy to move and it is strongly recommended to not attempt lifting 

them manually.

!  Only moving companies are allowed to lift or move the TV. Not technicians or installers

.

There is no requirements to which type of crane to use, but in order to attain a smooth 
and safe operation, it is recommended to use a crane like this:

L  =  

105-155cm, length of reach

 

 

(for Wall Bracket installation)

 

 

95-135cm, length of reach

 

 

(for Floor Stand installation)

H  =  

≥ 

235cm (height) 

W = 

≥ 

98cm (width)

The weight of BeoVision 4-85 is approx. 150 kg.
It is recommended to use a crane which is approved to handle loads up to 350 kg. 

The reason is to ensure a safe and steady installation.

Environment

It is strongly recommended to pay attention to the environment where the installation is going to take place. It is very important that all kinds of 
precautions are made to prevent damages to the environment (floors, walls, furnitures etc.).

Placement

Be sure that the surface where the product is going to be placed, is plane and the building design meets the required loads.

L

H

W

Summary of Contents for BeoVision 4-85





















Reviews: