![background image](http://html1.mh-extra.com/html/bang-and-olufsen/beovision-14-40/beovision-14-40_user-manual_471146082.webp)
For
Add Satellite
to be available, the
Settings
menu must be set up to four satellites in
the start of the installation.
Remove a satellite
You may be able to remove one or more satellites from your current satellite installation.
You remove the satellite and its channels. Some satellite providers do not allow removing
a satellite.
1. Press
, highlight
Settings
and press the
centre
button.
2. Highlight
Channels
and press
.
3. Highlight
Satellite Installation
and press the
centre
button.
4. Enter your child lock pin code if necessary.
5. Select
Search for Satellites
.
6. Select
Remove Satellite
. The current satellites are shown.
7. Select a satellite to remove.
8. Press
to go back one step or press
to leave the menu.
For
Remove Satellite
to be available, the
Settings
menu must be set up to four satellites
in the start of the installation.
Manual installation
Manual installation is intended for advanced users.
You can use manual installation to test the signal strenght of an LNB. You can test the
signal through each tuner individually, tuner 1 (Sat 1) or tuner 2 (Sat 2). Alternatively, you
can use manual installation to quickly add new channels from a satellite transponder. You
can only add channels on tuner 1 (Sat 1).
To add channels, you need to know the frequency and polarization of the transponder.
The television will install all channels of that transponder. If the transponder was installed
before, all its channels - the former and the new ones - are moved to the end of the
channel list
All
. You cannot use manual installation if you need to change the number of
satellites. If this is needed, you have to do a complete installation with
Install Satellites
.
To test an LNB or save channels from a transponder…
1. Press
, highlight
Settings
and press the
centre
button.
2. Highlight
Channels
and press
.
3. Highlight
Satellite Installation
and press the
centre
button.
4. Enter your child lock pin code if necessary.
5. Select
Manual Installation
.
6. Select
Tuner
.
7. Select the tuner you want to test.
8. If you have more than one satellite installed, select the satellite/LNB for which
you want to test or add channels.
9. Select
Polarization
, and then select the polarization you need.
10. If you set the
Symbol Rate Mode
to
Manual
, you can enter the symbol rate in
Symbol Rate
manually.
11. Select
Search
. The signal strenght is shown on-screen.
12. If you want to save the channels of a new transponder, select
Store
.
13. Press
to go back one step or press
to leave the menu.
Home transponder and LNB
On some markets, you can adjust the expert settings for homing transponder and each
LNB. Only use or change these settings when a normal installation fails. If you have a non-
standard satellite product, you can use these settings to overrule the standard settings.
Some providers may give you transponder or LNB values which you can enter here.
LNB Power
82
Summary of Contents for beovision 14-40
Page 1: ......