Bang & Olufsen BeoSound Ouverture, Manual

Page: 10 / 16

10
R E A D Y F O R U S E …
To complete the setting-up
procedure, make your
presettings of sound levels,
favourite radio stations, etc.
as described in the BeoSound
Ouverture User’s guide. When you have finished
setting up your BeoSound
Ouverture (and any other
equipment), connect it to
the mains using the mains
lead provided. A tiny red light
appears in the display,
indicating that the system is
in stand-by mode and ready
to be used.
However, in order for your set-
up to function properly, you
may need to preprogram it to
the correct
Option. The Beo-
Sound Ouverture can be pro-
grammed for the following
setup situations (
Options ):
Option 0. Used in a fully inte-
grated AV system with no
speakers connected to the
BeoSound Ouverture.
Option 1 (factory setting).
Used in a one-room setup,
when the BeoSound is
used either on its own, or
in an AV integrated setup
(with a pair of active
speakers connected to the
BeoSound Ouverture).
Option 2. Used in a two-room
AV integrated setup.
Option 5: Used when the Beo-
Sound Ouverture is placed in
a link room which also com-
prises a Bang & Olufsen TV
set.
Option 6. Used when the Beo-
Sound Ouverture is placed in
a link room
without a Bang
& Olufsen TV set.
The preprogramming is
done with a Bang & Olufsen
remote control, and must be
carried out with the system
switched to stand-by. The next page shows
different setup situations. In
all situations the BeoLink
distribution of sound (and
picture) to other rooms in
the house is possible. For
further information, please
contact your Bang & Olufsen
dealer.
Using a Beo4:
– Hold the • button while
pressing LIST. When the
Beo4 display reads
OPTION?, press GO.
– Press LIST once to display
A.OPT and then key in
the appropriate number
(0, 1, 2 or 6).
Using a Beolink 1000:
– Press SOUND, the appro-
priate number (0, 1, 2 or
6), and then STORE.
Option 1