11
The pincode system
You can activate a pincode
system and make a pincode of
your own choice. The pincode
system is deactivated when you
store an empty pincode.
The use of a pincode means that
if your music system has been
disconnected from the mains for
more than approximately 30
minutes, it can only be activated
again by switching it on and
entering your pincode.
If the pincode is not entered, the
music system automatically
switches to standby after
approximately three minutes.
To activate the pincode system …
> Use the
pointer
to highlight MODE.
> Turn the
wheel
to select SETTINGS and
press
GO
.
> Use the
pointer
to highlight
MAINTENANCE.
> Turn the
wheel
to select CHANGE
Pincode and press
GO
.
> Turn the
wheel
to enter a 4-digit pincode
of your choice, press
GO
to confirm each
digit. Use the right arrow button to delete
digits, if necessary. If all digits are deleted,
the entry is cancelled.
> Turn the
wheel
to select STORE and
press
GO
.
> Re-enter the pincode and press
GO
to
confirm each digit.
> Turn the
wheel
to select STORE and
press
GO
.
To deactivate the pincode system …
> Use the
pointer
to highlight MODE.
> Turn the
wheel
to select SETTINGS and
press
GO
.
> Use the
pointer
to highlight
MAINTENANCE.
> Turn the
wheel
to select CHANGE
Pincode and press
GO
.
> Turn the
wheel
to enter your current
pincode, press
GO
to confirm each digit.
Use the right arrow button to delete all
digits and select STORE. This will disable
pincode protection.
> You must now store an ‘empty’ pincode.
To do so, turn the
wheel
to select STORE
and press
GO
twice.
Five incorrect entries will cause the music
system to shut down for three hours, during
which operation is not possible.
To change the pincode …
> Use the
pointer
to highlight MODE.
> Turn the
wheel
to select SETTINGS and
press
GO
.
> Use the
pointer
to highlight
MAINTENANCE.
> Turn the
wheel
to select CHANGE
Pincode and press
GO
.
> If the pincode system is activated, you
must enter your current pincode before
you can change the pincode. To do so,
turn the
wheel
to enter your current
pincode, press
GO
to confirm each digit.
Use the right arrow button to delete digits,
if necessary.
> Turn the
wheel
to select STORE and press
GO
.
> Now turn the
wheel
to enter a 4-digit
pincode of your choice, press
GO
to
confirm each digit. Use the right arrow
button to delete digits, if necessary.
> Turn the
wheel
to select STORE and press
GO
to confirm.
> Re-enter the pincode and press
GO
to
confirm each digit.
> Turn the
wheel
to select STORE and
press
GO
.
Note that it is only possible to change the
pincode ten times within a period of three
hours.
1
2
3
4
ENTER CURRENT PIN CODE 5
REMAINING ATTEMPTS: 5 6
7
8
9
STORE
Summary of Contents for BeoSound 5 Encore
Page 1: ...BeoSound 5 Encore Guide...
