7
R E A D Y F O R U S E …
When you have finished setting up your BeoSound
2000, connect it to the mains using the mains lead
provided. The source buttons (i.e. RADIO, CD, TAPE,
AUX) and the stand-by button lights up in red for a few
seconds. When the door is closed, the red light in the
stand-by button indicates that the system is in stand-by
mode, ready to be used.
Choosing the antenna you want to use
The antenna input for FM signals has two options:
• An option which is optimized for use with the
optional active FM antenna.
• An option which is optimized for use with other types
of antenna (this is the factory setting).
If you have fitted the active FM antenna, select the
active antenna option. Later on, when using other FM
antennas, remember to cut out the active antenna
option again in order to obtain optimal reception.
Remote control
Your BeoSound 2000 facilitates operation from a Bang
& Olufsen remote control. Please refer to the User's
guide for further information.
You may, if you wish, disable the remote control
function. Later on, if you regret, you can cut the
function in again.
To complete the setting-up
procedure, make your
presettings of sound levels,
favourite radio stations, etc. as
described in the User's guide
for your BeoSound 2000.
NOTE:
These particular presettings are done by pressing the buttons on
the BeoSound 2000 even though they are
not
lit up in red!
To select the active antenna
option:
press • (stand-by)
press TUNE, 1, STORE
The digit 1 is briefly displayed.
To cut out the active antenna
option:
press • (stand-by)
press TUNE, 0, STORE
The digit 0 is briefly displayed.
To disable the remote control
function:
press • (stand-by)
press SOUND, 0, STORE
The digit 0 is briefly displayed.
To regain the remote control
function:
press • (stand-by)
press SOUND, 1, STORE
The digit 1 is briefly displayed.
