11
Switch between playback and download:
BeoSound 2 must be placed on
the docking station. Press
GO
to start playback, or press and hold
GO
for 2
seconds to connect to the computer – enabling you to download to
BeoSound 2. The docking station light changes colour accordingly.
Change mode:
Switch between BeoPlayer and iTunes mode. BeoSound 2 is
in BeoPlayer mode per default. To change this setting, make sure that
BeoSound 2 is paused, and that the Earphones are connected.
BeoSound 2 feedback
Audible feedback:
BeoSound 2 gives you audible feedback for example
when:
– Battery power is low (beep repeated every 30 seconds)
– Error occurs (beep repeated every 5 seconds)
– Firmware update is completed
– A memory card is formatted
Docking station light feedback:
When BeoSound 2 is placed on the
docking station, the docking station lights up to indicate its current status:
Green…
Track playback or pause, not connected to the computer.
Red…
Download mode, connected to the computer.
Orange…
Resetting – continuous orange light feedback indicates error.
Flashing light (red or green)…
Battery charging.
Flashing red and green, followed by orange, then red…
Updating Firmware.
Go to iTunes mode:
Press and hold
∧
and
ss
.
Then press
GO
twice, without
letting go of the first two
buttons. Audible feedback
informs you that BeoSound 2 has
changed to iTunes mode.
Go to BeoPlayer mode:
Press and hold
∨
and
ss
.
Then press
GO
twice, without
letting go of the first two
buttons. Audible feedback
informs you that BeoSound 2 has
changed to BeoPlayer mode.
Summary of Contents for BeoSound 2
Page 1: ...BeoSound 2 Guide ...
Page 44: ......
Page 45: ...3508604 0601 Printed in Denmark by Bogtrykkergården a s Struer ...
Page 46: ...www bang olufsen com ...
