Bang & Olufsen BeoMedia 1, Getting Started

Page: 14 / 24

– Avoid placing the BeoMedia in direct sun-
light or direct artificial light, such as a spot-
light.
– Make sure that the BeoMedia is set up,
placed and connected in accordance with
the instructions.
– Do not subject the BeoMedia to high
humidity, rain or sources of heat.
– The BeoMedia is developed for indoor use
in dry, domestic environments only. Use
within a temperature range of 10–40°C
(50–105°F).
– Leave enough space around the BeoMedia
for adequate ventilation (5 cm).
– Do not attempt to open the BeoMedia.
Leave such operations to qualified service
personnel.
– In case your BeoMedia starts making
excessive noise, you should hand it in for
service immediately.
– The BeoMedia can only be switched off
completely by disconnecting it from the
wall socket.
BeoMedia 1 includes the following
products:
– BeoMedia 1
– Cables
– IR receiver (only required in some
setups)
– Software (pre-installed)
The complete setup is referred to as
BeoMedia 1.
BeoMedia 1 must be installed and set
up by a professional installer. Various
setups are illustrated on pages 15–17.
Set up BeoMedia 1
Handling your BeoMedia 1
14