Bang & Olufsen BeoLink Passive, User Manual

Page: 9 / 12

9
Adjusting BeoLink Passive sound
The sound in your BeoLink Passive
setup is adjusted quite independently
from your main Bang & Olufsen system:
You can, of course, adjust volume any
time by pressing
∧
or
∨
on the Beo4
remote control; or you can press the
volume button right on the middle to
silence the speakers completely.
Each time you press the LIST button on
the Beo4 remote control, a new cue
appears in the display.
When you have found the cue for the
function you want, you must press the
GO button to switch on (activate) the
function.
Pressing LIST enables you to access the
cue
A.SETUP *. When you press GO and
LIST again, you may now adjust the
sound coming out of the speakers in
your BeoLink Passive setup by means of
the cues
BASS
,
TREBLE
and
LOUDNESS
.
Then use the step buttons
▲
or
▼
, GO,
and
ss
or
tt
to adjust as required.
See how to the right on this page...
All the sound levels will be reset to
their original settings when you switch
off the BeoLink Passive.
However, all you have to do to turn
your adjustment into a permanent
setting of your BeoLink Passive setup is
press LIST to display
A.SETUP * then GO.
Press LIST again to display S.STORE then
GO.
Please note…
• All the current sound levels (volume, balance,
bass, treble and loudness) will be stored
simultaneously.
• If you wish to adjust sound levels for video
sources, you must display V.SETUP * on Beo4
instead of
A.SETUP
* .
• Pressing LIST to display
RESET
* and then GO
resets your sound adjustment – if it hasn’t been
stored.
*Note: In order to display A.SETUP , V.SETUP ,
RESET , and SPEAKER on Beo4, you must add the
functions to Beo4. See Beo4’s own User’s guide
and the chapter,
Customising your Beo4, for
further instruction.
Raises the volume
Lowers the volume
Press right on the middle to silence
the speakers immediately
Press again to recall the sound
Press to display SPEAKER *
Adjusts balance to the left
Adjusts balance to the right
Press to display
A.SETUP
*
Press to display BASS
More bass
Less bass
Press to display TREBLE
More treble
Less treble
Press to display
LOUDNSS
Sets loudness on/off
Adjust the various sound levels to
your liking, then...
Press to display A.SETUP *
Press to display
S.STORE
Press to store your new sound levels
as a permanent setting of your
BeoLink Passive speakers
LIST
or
ss
tt
LIST
LIST
LIST
then
GO
LIST
then
GO
LIST
LIST
GO
GO
or
or