11
Setting the front panel switches
Before switching on your audio or
video system you must set the
three switches on the front panel
of the amplifier to their correct
position. To open the front panel,
press gently on the upper middle
part of the panel and release.
INPUT LEVEL switch
Set the INPUT LEVEL switch to the
position required to match the
Beolab Penta to the output of
your receiver or TV set. If in doubt
about your receiver/TV output,
consult your Bang & Olufsen
dealer.
POWER LINK socket:
If you are using Power Link cables,
set the switch to .
SPEAKER LINK socket:
LINE IN socket:
Switch
position 4 ohm
8 ohm
Receiver/TV output*
40
- 40 W
40 - 80 W
80 -
80
W
Switch
position
Pre-amplifier output
1.4
- 1
.4
V
1
.4
- 1.4 V
1.4 -
1.4
V
40
- 20 W
20 - 40 W
40 -
80
W
* 4 ohms and 8 ohms receiver/TV output
specified for 4 and 8 ohms speaker
impedance.