Bang & Olufsen BeoLab 7-4, User Manual

Page: 5 / 12

Here is shown how to fasten
the loud speaker with a ‘ type 1
bracket’ to a Bang & Olufsen
‘single-column’ stand (or wall
bracket). Use the same procedure
if you wish to fasten the loud-
speaker to a Bang & Olufsen
‘double-column’ Stand – with a
‘ type 2 bracket’ .
a Remove the small cover (if any)
on the stand. Press the cover as
shown, and it will come loose.
b Fasten the bracket to the stand or
wall bracket. Use the two longest
screws (M5 × 25 mm) – four
screws for a ‘ type 2 bracket’ .
c Fasten the loudspeaker to the
bracket. Use the short screw
(M5 × 8 mm). However, do not
fully tighten it until you have made
the adjustments mentioned to the
right ( d ). Adjustments: Use the two screws
( d ) to align the loudspeaker with
the stand or wall bracket. Then
position the loud speaker so that the
side is vertical, and finally tighten
the screw ( c ).
b
c
c
d
c
d
a
5
d c