Examples of source functions …
– Press the number buttons to
enter the program, track or disc
number you want to hear.
– Press or to step through
programs, recordings or tracks.
– Press or to search through a
CD in a single CD player, or step
between CDs in a multi-CD
player.
– Press the yellow button to search
forward through a CD in a multi-
CD player.
– Press the green button to search
backward through a CD in a
multi-CD player
– Press
STOP
to pause playback.
Press a second time to stop
playback completely
– Press
GO
to resume playback
– Press • to switch off the link
speaker. Press and hold to switch
off your Bang & Olufsen system
as well.
Refer to the Guide enclosed with
your main system for further
information about source functions.
Additional functions with Beo4 ...
Mute …
Pressing the middle of the
volume button while BeoLab 3500
is in standby, corresponds to
touching
MUTE •
directly on
BeoLab 3500 (see p. 13).
Playback …
To start playback on a
secondary video recorder or DVD
player in your main system, press
LIST
to display DVD2* (V.TAPE2)
and then
GO
.
BeoLab 3500 and the main
system in one room …
When BeoLab 3500 is set up in the
same room as the main system, and
you press a source button, such as
RADIO
,
CD
or
TV
, the sound is
reproduced through the
loudspeakers in the main system.
However, if you want the sound
reproduced through BeoLab 3500
instead, press
LIST
to display LINK*
and then a source button, such as
RADIO
,
CD
or
TV
.
BeoLab 3500 must be set to Option 4
as explained in ‘Ready for use …’
(p. 22).
9
*NOTE! In order to display these
functions, you must first add them
to the Beo4 list of functions. Refer
to the chapter ‘
Customising your
Beo4’
in
the Beo4 Guide.
