manualshive.com logo in svg

Bang & Olufsen BeoLab 3, User Manual

Share
Download
Bang & Olufsen BeoLab 3 User Manual Download Page 2

Acoustic Lens Technology – 

manufactured under license from 

Sausalito Audio Works. 

To get access to the approval labels, 

remove the BeoLab 3 top cap. 

NOTE! Prolonged listening at high 

volume levels may cause hearing 

damages 

WARNING:

 To prevent fi re or electric 

shock, do not expose this appliance 

to rain or moisture. Do not expose 
this equipment to dripping or 

splashing and ensure that no objects 

fi lled with liquids, such as vases, are 

placed on the equipment. 

To completely disconnect this 

equipment from the AC Mains, 
disconnect the power supply cord 
plug from the AC receptacle. 

This symbol indicates that a 

dangerous voltage 
constitut ing a risk of electric 
shock is present within this 

unit.

This symbol indicates that there 

are important operating and 
maintenance instructions in the 
literature accompanying this 
unit.  

CAUTION: To reduce the risk of 

electric shock, do not remove 
cover (or back).
No User-serviceable parts inside. 
Refer servicing to qualified 
service personnel. 

Summary of Contents for BeoLab 3













Reviews:

No comments

Brands by name

Popular brands

Load more brands