Accessories
10 Accessories
The following accessories have undergone functional testing by B&R in connection with the device used and can
be operated with this device. Possible limitations regarding operation with individual components other than the
complete system must be taken into account, however. All individual specifications of the components must be
observed when operating the complete system.
All components listed in this manual have undergone intensive system and compatibility testing and been approved
accordingly. B&R cannot assume any functional warranty for accessories that have not been approved.
10.1 General accessories
The following accessories can be ordered for the Automation PC, Panel PC link modules and converters:
•
Grounding clip
•
Cable strain relief clip for USB (
see "Cable strain relief clip" on page 41
)
10.1.1 Accessories - Order data
Material number
Description
5ACCRHMI.0000-000
REP HMI grounding clip
5ACCRHMI.0011-000
REP strain relief USB - For APC2100/APC2200 - For SDL3 Converter/SDL4 Converter
10.2 Installation accessories
Suitable tool sets can be ordered to easily install B&R industrial PCs and converters.
•
Consisting of:
5ACCRHMI.0006-000
°
1x torque screwdriver: 0.4 to 2.0 Nm
°
1x bit set (5 pieces): Hex recess (2.5 mm, 3.0 mm, 5.0 mm), Torx (T10, T20)
10.2.1 Order data
Order number
Short description
Figure
Other
5ACCRHMI.0006-000
HMI installation tool for control cabinet - 1x torque wrench 0.4 -
2.0 Nm - 1x hex head bit 2.5, length 89 mm - 1x hex head bit
3.0, length 89 mm - 1x hex head bit 5.0, length 89 mm - 1x Torx
10 bit, length 90 mm - 1x Torx 20 bit, length 89 mm
SDL3 Converter User's manual V 2.01
39