B&R Power Panel T30, User Manual

Page: 97 / 140

Software-specific information • OPC UA server • Information model
Power Panel T30 User's manual V1.42 - Translation of the original documentation 97
6.6.1.4 MethodSet
All methods of the Power Panel are accessible under the following path:
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT30/2:MethodSet
ns Path/Node Description
0 Root Root directory
0 Objects
Object directory
2 DeviceSet
Device directory
4 PowerPanelT30 Node for the "Power Panel T30" device
2 MethodSet Node containing all methods of the device
ns BrowseName of the method Description
AwakePanel "Wakes up" the Power Panel when the screensaver is running.
BuzzerDefault Plays the buzzer with the system settings.
BuzzerWithPara Plays the buzzer with the specified parameters.
CalibrateTouch Starts touch screen calibration.
LoadConfiguration The Power Panel loads the last saved settings and restarts. Any changes made to the parameters are not saved and
are lost.
SaveConfiguration Changes made to the parameters are saved. Method
LoadConfiguration
must be used to enable these stored settings
on the Power Panel.
SetBrightness Changes the screen brightness from 20% to 100%.
SetBrightnessUnlimited
Changes the screen brightness from 0% to 100%.
SetTime Sets the date and/or time of the device.
4
StartUpdate Reboots the Power Panel and start the update process.
6.6.1.5 Device properties
Device properties (product-specific information) of the Power Panel is located under the following path:
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT30
ns Path/Node Description
0 Root
Root directory
0 Objects
Object directory
2 DeviceSet Device directory
4 PowerPanelT30 Node for the "Power Panel T30" device
ns BrowseName of the information Description
3 CompatibilityId ID to indicate compatibility.
2 DeviceManual Link to the website: The user's manual is located in the Downloads section.
2 DeviceRevision Hardware revision of the device (e.g. C3).
2 HardwareRevision Hardware revision of the device (e.g. C3).
2 Manufacturer Manufacturer of the device: B&R Industrial Automation GmbH
2 Model
Model number of the device: e.g. 6PPT30.101G-20W.
3 ProductCode
B&R ID code (see technical data of the device).
2 RevisionCounter Value: -1 (reserved, not in use)
2 SerialNumber Serial number of the device (see label on back of the device).
2 SoftwareRevision Software version of the PPT system: e.g. 1.2.0
3 VendorId Vendor ID for customized models.
6.6.1.6 Alternative paths of nodes
The nodes described in the previous sections can also be retrieved using other paths. This alternative structure
divides the nodes of ParameterSet , MethodSet and Device properties into logical function groups. The detailed
description of the nodes in the following section is structured according to this logical structure.