B&R Panel PC 800 User Manual Download Page 52

Page: 52 / 396

Technical data • Complete system

Panel PC 800 User's Manual V1.30

2.6.16 Slide-in compact slot

The internal connection between the slide-in compact slot and the chipset is made via SATA I.

Slide-in compact slot

Connection

SATA I

Model number

Short description
Adapters

5AC803.BC02-00

PPC800 1 slide-in compact adapter

Drives

5AC801.HDDI-00

40 GB slide-in compact SATA hard disk, 24/7 operation

with extended temperature range. Note: Please see the

manual for information about using this hard disk.

5AC801.HDDI-02

160 GB SATA hard disk, slide-in compact, 24/7 operation

with extended temperature range. Note: Please see the

manual for information about using this hard disk.

5AC801.HDDI-03

250 GB slide-in compact SATA hard disk; 24/7 operation.

Note: Please see the manual for information about using

this hard disk.

5AC801.HDDI-04

500 GB slide-in compact SATA hard disk; 24/7 operation.

Note: Please see the manual for information about using

this hard disk.

5AC801.SSDI-00

32 GB SATA SSD (SLC), slide-in compact

5AC801.SSDI-01

60 GB SATA SSD (MLC), slide-in compact

5AC801.SSDI-02

180 GB SATA SSD (MLC), slide-in compact

5AC801.SSDI-03

60 GB SATA SSD (MLC), slide-in compact

5AC801.SSDI-04

128 GB SATA SSD (MLC), slide-in compact

5AC801.SSDI-05

256 GB SATA SSD (MLC), slide-in compact

Slide-in compact

drive

Table 31: Slide-in compact slot

Information:

The adapter 5AC803.BC02-00 is required for the use of slide-in compact drives.

Information:

The SATA I interface allows disks to be replaced during operation (hot plugging). In order to take

advantage of this capability, this feature must be supported by the operating system.

2.6.17 PCIec slot (Card slot)

PCIec slot

Model number

Short description
Adapters

5AC803.BC01-00

PPC800 1 PCI Express compact adapter

Plug-in cards

5ACPCC.ETH0-00

Compact PCIe Ethernet card 1x 10/100/1000

5ACPCC.MPL0-00

PCIec POWERLINK card, 2 POWERLINK interfaces, 512

kB SRAM

PCIec card slot

Table 32: PCIec slot

Information:

The adapter 5AC803.BC01-00 is required to use PCIec plug-in cards.

Information:

Only B&R PCIec cards that have been specially designed for the Automation PC 820 and Panel PC

800 can be used.

For more information, see "PCIec plug-in cards" on page 78.

Summary of Contents for Panel PC 800













































































































































































































































































































































































































Search results

Summary of Contents for Panel PC 800

Reviews:

Related manuals for Panel PC 800

Brands by name

Popular brands

B&R Panel PC 800, User Manual

Search results

Summary of Contents for Panel PC 800

Reviews:

Related manuals for Panel PC 800

Brands by name

Popular brands