Technical data
92
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
2.3.5.9 5AC901.ISIO-00
2.3.5.9.1 General information
The ready relay function of IF option 5AC901.ISIO-00 can be controlled using the MTCX. Corresponding commands
must be issued by the MTCX in order to switch the ready relay.
In addition to the ready relay function, the reset and power button as well as the power LED of the APC910/PPC900
or APC3100/PPC3100 can be routed externally.
Unlike IF option 5AC901.IRDY-00, ready relay 5AC901.ISIO-00 is not automatically switched on or off if the power
supply to the PC is switched on or off.
The maximum cable length for connecting the reset button, power button and LED "Power" is 2 m.
•
Connections for the reset button and power buttons on the PC
•
Connection for LED "Power" on the PC
•
1 normally closed contact, 1 normally open contact of the ready relay
•
Control of the ready relay functions using MTCX commands
•
Compatible with APC910/PPC900 and APC3100/PPC3100
2.3.5.9.2 Order data
Model number
Short description
Figure
Interface options
5AC901.ISIO-00
Interface card - System I/O - For APC910/PPC900/APC3100/
PPC3100
Table 109: 5AC901.ISIO-00 - Order data
2.3.5.9.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5AC901.ISIO-00
General information
B&R ID code
0xE674
Ready relay
Normally open contact and normally closed contact, max. 30 VDC, max. 1 A
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
Electrical characteristics
Power consumption
0.5 W
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Environmental conditions
Temperature
Operation
0 to 60°C
1)
Storage
-20 to 60°C
Transport
-20 to 60°C
Table 110: 5AC901.ISIO-00 - Technical data
StockCheck.com
