Technical data
62
Automation PC 3100 User's manual V 1.00
Translation of the original documentation
2.3.4 Graphics options
Information:
Graphics options can only be operated in the IF option 3 slot.
Information:
For information about replacing or installing a graphics option, see section
option and DDR4 SDRAM" on page 254
.
After installation or replacement, it may be necessary to load the defaults settings in BIOS (
).
2.3.4.1 5ACCLI02.DPO0-000
2.3.4.1.1 General information
Graphics option 5ACCLI02.DPO0-000 is equipped with a DisplayPort and USB 2.0 interface.
•
DisplayPort interface
•
USB 2.0 interface
•
Compatible with APC3100/PPC3100
2.3.4.1.2 Order data
Model number
Short description
Figure
Graphics options
5ACCLI02.DPO0-000
Graphics option - 1x DisplayPort transmitter (version 1.2) - For
APC3100/PPC3100
Table 49: 5ACCLI02.DPO0-000 - Order data
2.3.4.1.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5ACCLI02.DPO0-000
General information
B&R ID code
0xEEE6
Certifications
CE
Yes
UL
cULus E115267
Industrial control equipment
HazLoc
cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
Interfaces
USB
Quantity
1
Type
USB 2.0
Design
Type A
Transfer rate
Low speed (1.5 Mbit/s), full speed (12 Mbit/s) to high speed (480 Mbit/s)
Current-carrying capacity
Max. 05 A
DisplayPort
Quantity
1
Version
1.2
Table 50: 5ACCLI02.DPO0-000 - Technical data
StockCheck.com
