Technical data
116
Panel PC 2100 user's manual V1.17
Model number
5AP1182.1043-000
Touch screen
3)
Type
AMT
Technology
Analog, resistive
Controller
B&R, serial, 12-bit
Transmittance
81% ±3%
Keys
Function keys
44 with LED (yellow)
System keys
Numeric keys, cursor block
Service life
>1,000,000 actuations at 1 ±0.3 N to 3 ±0.3 N actuating force
LED brightness
Yellow
Typ. 38 mcd
Operating conditions
Pollution degree per EN 61131-2
Pollution degree 2
Degree of protection per EN 60529
Front: IP65
Back: IP20 (only with installed link module or installed system unit)
Protection per UL 50
Front: Type 4X indoor use only
Mechanical properties
Front
4)
Frame
Naturally anodized aluminum
Keypad overlay
Material
Polyester
Light background
RAL 9006
Dark gray border around display
RAL 7024
Gasket
3 mm built-in gasket
Dimensions
Width
423 mm
Height
288 mm
Weight
3500 g
Table 83: 5AP1182.1043-000 - Technical data
1)
Yes, although applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2)
At an ambient temperature of 25°C. Reducing the brightness by 50% can increase the half-brightness time by approximately 50%.
3)
Touch screen drivers for approved operating systems are available for download in the Downloads section of the B&R website.
4)
There may be visible deviations in the color and surface appearance depending on the process or batch.
2.3.2.10.4 Dimensions
423
28
8
Figure 81: 5AP1182.1043-000 - Dimensions
2.3.2.10.5 Requirements
10.4" AP1000 panels are supported starting with the following firmware versions:
•
Firmware V3.11 or later for SDL/DVI receiver 5DLSDL.1001-00
•
Firmware V4.08 or later for SDL3 receiver 5DLSD3.1001-00
•
Firmware V1.03 or later for PPC2100 system unit 5PPC2100.BYxx-000
•
Firmware V1.18 or later for PPC900 system unit 5PC901.TS77-xx
