B&R MAPPC800-ENG, User Manual

Page: 201 / 396

Software • BIOS options
Section 4
Soft
w
are
201 Panel PC 800 User's Manual V 1.00
1.4.12 Remote access configuration
Figure 101: 945GME - Advanced Remote Access Configuration
BIOS setting Meaning Setting options Effect
Remote access The remote access function can be
enabled/disabled here. Disabled Disables this function.
Enabled Enables this function.
Serial port number The serial interface can be set using this
option, as long as disabled is not entered
in the
remote access field.
COM1 Enables the COM1 interface as remote access
interface.
COM2 Enables the COM2 interface as remote access
interface.
Base address, IRQ Serial connection display for the logical
address and interrupt, as long as disabled
is not entered in the
remote access field.
None -
Serial port mode The serial interface transfer rate is defined
here, as long as disabled is not entered in
the
remote access field.
115200 8,n,1
57600 8,n,1
38400 8,n,1
19200 8,n,1
09600 8,n,1
Value set manually.
Flow control This setting determines how the transfer is
controlled via the interface.
Information:
The setting must be the same on the
terminal and the server.
None The interface is operated without transfer control.
Hardware The interface transfer control is carried out
through hardware. This mode must be supported
by a cable.
Software The interface transfer control is carried out
through software.
Table 108: 945GME - Advanced Remote Access Configuration - Setting options
Advanced
Configure Remote Access type and parameters Select Remote Access
type.
Serial Port BIOS Update [Disabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Remote Access [Disabled]
BIOS SETUP UTILITY
v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.