B&R MAPPC700A-ENG, User Manual

Page: 355 / 524

Standards and certifications • Requirements for immunity to disturbances
Chap
ter 5
Sta
nda
rds a
nd
certi
fica
tion
s
355 Panel PC 700 with 945GME N270 CPU board User's Manual V 1.16
4.6 Magnetic fields with electrical frequencies
DC mains inputs/outputs 150 kHz - 80 MHz, 10 V, 80%
amplitude modulation with 1 kHz,
length 3 seconds, criteria A
150 kHz - 80 MHz, 3 V, 80%
amplitude modulation with 1 kHz,
length 3 seconds, criteria A
Functional ground connections 0.15 - 80 MHz, 10 V, 80%
amplitude modulation with 1 kHz,
Length 3 seconds, criteria A
150 kHz - 80 MHz, 3 V, 80%
amplitude modulation with 1 kHz,
length 3 seconds, criteria A
Signal connections >3 m 0.15 - 80 MHz, 10 V, 80%
amplitude modulation with 1 kHz,
Length 3 seconds, criteria A
150 kHz - 80 MHz, 3 V, 80%
amplitude modulation with 1 kHz,
length 3 seconds, criteria A
Test carried out according to
EN 61000-4-8 Limits according to
EN 61000-6-2
Limits according to
EN 61131-2
Test direction x, test in the field of
an induction coil 1 m x 1 m 30 A/m, criteria A 30 A/m, criteria A
Test direction y, test in the field of
an induction coil 1 m x 1 m 30 A/m, criteria A 30 A/m, criteria A
Test direction z, test in the field of
an induction coil 1 m x 1 m 30 A/m, criteria A 30 A/m, criteria A
Table 176: Test requirements - Magnetic fields with electrical frequencies
Test carried out according to
EN 61000-4-6 Limits according to
EN 61000-6-2
Limits according to
EN 61131-2
Table 175: Test requirements - Conducted disturbances (Forts.)