Software • B&R Automation Device Interface (ADI) driver - Control Center
Section 4
Soft
w
are
379
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
10.4.3 Changing UPS battery settings
1) Open the
Control Center
in the
Control Panel
.
2) Select
UPS
tab.
3) Under "Battery settings," click on
Edit
. Clicking on "Open" opens a dialog box.
4) Select and
open
the file containing the battery settings.
In this dialog box you can change the settings for the UPS battery.
The changed settings are written to the file by clicking on the
OK
button. The battery settings for
the UPS can then be updated with this file.
Information:
The current status of the UPS is also displayed when the UPS service is started in
the Windows Control Panel on the UPS page in the energy options.
Information:
In a German version of Windows XP Professional the battery status is displayed as
"low" in the energy options, even if the battery is OK (Windows error). In an English
version, three battery status levels are displayed: unknown, OK, replace A low
battery status is never displayed.
Figure 176: ADI Control Center - UPS battery settings
Summary of Contents for Automation PC 620
Page 2: ...2 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 4: ...4 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 6: ...6 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...
Page 568: ...568 Appendix A Glossary Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10 ...