B&R Automation PC 620, User Manual

Page: 287 / 594

Software • BIOS options
Section 4
Soft
w
are
287 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Primary IDE Master
Figure 130: X945 Primary IDE Master
BIOS setting Meaning Setting options Effect
Type The type of drive connected to the primary
master is configured here. Not installed No drive installed.
Auto Automatic recognition of the drive and setup of
appropriate values.
CD/DVD CD -/ DVD drive.
ARMD ARMD - drive (zip drive)
LBA/Large Mode This option activates the logical block
addressing / large mode for IDE. Disabled
Disables this function.
Auto
Automatic enabling of this function when
supported by the system.
Block (Multi-Sector
Transfer) This option enables the block mode for
IDE hard drives. When this option is
enabled, the number of blocks per request
from the configuration sector of the hard
drive is read. Disabled Disables this function.
Auto Automatic enabling of this function when
supported by the system.
Table 180: X945 Primary IDE Master setting options
Advanced
Primary IDE Master Select the type
of device connected
to the system.
LBA/Large Mode [Auto]
Block (Multi-Sector Transfer) [Auto]
PIO Mode
[Auto]
DMA Mode [Auto]
S.M.A.R.T. [Auto]
32Bit Data Transfer [Enabled]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Device :Not Detected
Type [Auto]
BIOS SETUP UTILIT Y
v02.66 (C)Copyright 1985-2009, American Megatrends, Inc.