B&R Automation PC 620, User Manual

Page: 249 / 594

Commissioning • Connection examples
Section 3
Com
m
is
sio
ning
249 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
4.10.1 Basic system requirements
The following table shows the possible combinations for the APC620 system unit with CPU
board to implement the configuration shown in the figure above. If the maximum resolution is
limited when making the combination then it is also shown in this table.
If an Automation Panel 800 and an Automation Panel 900 should be connected on the same line,
the devices must have the same display type.
4.10.2 Link modules
4.10.3 Cables
How to select an SDL cable for connecting the AP900 display to the AP900 display 4.3 "An
Automation Panel 900 via SDL (onboard)".
How to select an SDL cable for connecting the AP800 display to the AP900 display4.4 "An
Automation Panel 800 via SDL (onboard)".
CPU board with system unit Restriction
Resolution
5PC600.SX01
-00
5PC600.SX02
-00
5PC600.SX02
-01
5PC600.SF03
-00
5PC600.SX05
-00
5PC600.SX05
-01
5PC600.SE00
-00 / -02
5PC600.X945-00 -
✓
-
✓ ✓
- - max. XGA
Table 159: Possible combinations of system unit and CPU board
Model number Description Note
5DLSDL.1000-00 Automation Panel Link SDL receiver
Connection for SDL in, transfer of display data, touch screen, USB 1.1, matrix keys, and service data,
24 VDC (screw clamp 0TB103.9 or cage clamp 0TB103.91 sold separately).
For Automation
Panel 900
5DLSDL.1000-01 Automation Panel Link SDL transceiver
Connections for SDL in, transfer of display data, touch screen, USB 1.1, matrix keys, and service
data, 24 VDC (screw clamp 0TB103.9 or cage clamp 0TB103.91 sold separately).
For Automation
Panel 900
2 pieces required
5AC600.SDL0-00 APC620 Smart Display Link transmitter
For connecting Automation Panels to an APC620 via SDL.
For Automation PC
620
1 pieces required
Table 160: Link modules for configuration: 3 AP900 units and one AP800 via SDL (AP Link) and RGB
(onboard)