B&R Automation PC 510 Page 114 User Manual Download

Page: 114 / 194

Software • BIOS options

114

Automation PC 510 User's Manual V 1.01

1.8 Boot

InsydeH2O Setup Utility Rev. *

Main

Exit

OEM Features Advanced Security Power

Boot

Allows InsydeH2O to skip

certain tests while

booting. This will

decrease the time needed

to boot the system.

Quick Boot

<Enabled>

Quiet Boot

USB Boot

SD Card Boot

PXE Boot to LAN

ACPI Selection

Legacy

Delay for Logo & Summary <Default>

<Enabled>

<Disabled>

<Acpi3.0>

<Enabled>

Disabled

Esc

Enter

F10

Help Select Item

Change Values Setup Defaults

Exit Select Menu

Select SubMenu

Save and Exit

F5/F6

Image 62: US15W Boot - Menu

BIOS setting

Meaning

Setting options

Effect

Enabled

Enables this function.

Quick Boot

This function reduces the boot time by skipping

some POST tests.

Disabled

Disables this function.

Enabled

OEM logo display instead of POST message.

Quiet Boot

Determines if POST message or OEM logo (de-

fault = black background) is displayed.

Disabled

POST message display.

Default

The display duration is minimized for a quick

boot procedure.

Delay for Logo & Summary Option for setting the display duration of the logo

and summary screen.

1 Sec., 1.5 Sec., 2 Sec.,

2.5 Sec., 3 Sec., 4 Sec.,

5 Sec., 10 Sec., 20 Sec.

A display duration of x seconds can be defined.

Enabled

Enables this function.

USB Boot

This function can be used to enable / disable the

option of booting from USB devices.

Disabled

Disables this function.

Enabled

Enables this function.

SD Card Boot

This function can be used to enable / disable the

option of booting from SD cards.

Warning!

SD memory cards are only permitted for

use as a mass storage device. It is not

possible to boot from an SD card.

Disabled

Disables this function.

Enabled

Enables this function.

PXE Boot to LAN

This function can be used to enable / disable the

option of booting from LAN (ETH).

Disabled

Disables this function.

Acpi 1.0B

ACPI functions in accordance with v1.0B

Acpi 3.0

ACPI functions in accordance with v3.0

ACPI Selection

Option for setting the power option specifications

to be supported. The ACPI functions must be sup-

ported by the drivers and operating systems be-

ing used.

Acpi 4.0

ACPI functions in accordance with v4.0

Legacy

Boot order configuration and display

Enter

Opens the submenu

See " Legacy" on page 115

Table 115: US15W Boot - Menu setting options

Summary of Contents for Automation PC 510



































































































































































































Search results

Summary of Contents for Automation PC 510

Reviews:

Related manuals for Automation PC 510

Brands by name

Popular brands

B&R Automation PC 510, User Manual

Search results

Summary of Contents for Automation PC 510

Reviews:

Related manuals for Automation PC 510

Brands by name

Popular brands