B&R ACOPOSinverter P84, User Manual

Page: 314 / 405

Programming guidelines
314 ACOPOSinverter P84 User's Manual 2.10
2.8.16 [FACTORY SETTINGS] (FCS-)
2.8.16.1 With graphic display terminal:
<< Quick
<<
:
:
:
English
RDY
Term +0.00 Hz
0 A
1 DRIVE MENU
1.6 CONTROL
.
1.8 ERROR MANAGEMENT
1.9 COMMUNICATION
1.10 DIAGNOSTICS
1.11 IDENTIFICATION
1.12 FACTORY SETTING
1.13 USER MENU
1.7 APPLICATION FUNCT
Code Quick
1.1 SIMPLE START MENU
1.2 MONITORING
1.3 SETTINGS
1.4 DRIVE DATA
1.5 INPUTS/OUTPUTS
<< <<
English
RUN
Term +50.00 Hz 80 A
1:11 AM FACTORY SETTING
Quick
Config. Source : Macro conf.
[PARAMETER GROUP
GOTO FACTORY SETTINGS
Save config : No
Code << >>
ENT
ENT
English
RDY
Term +0.00 Hz 0 A
MAIN MENU
Code
Quick
1 DRIVE MENU
2 ACCESS LEVEL
3 OPEN / SAVE AS
4 PASSWORD
5 LANGUAGE
2.8.16.2 With integrated display terminal:
Switch on
Display the status of the inverter
FACTORY SETTINGS
The menu [FACTORY SETTING] (FCS-) is used for the following tasks:
• Replacing the current configuration with the factory configuration or a previously saved configuration.
The current configuration can be replaced completely or partially: Select a group of parameters to define
the menus with which the selected source configuration will be loaded.
•
Save the current configuration in a file.