B&R ACOPOSinverter P84, User Manual

Page: 114 / 405

Programming guidelines
114 ACOPOSinverter P84 User's Manual 2.10
2.7 Integrated display terminal
All ACOPOSinverter P84 have an integrated display terminal with a 4-digit 7-segment display. The graphic display
terminal described on the previous pages can also be connected to this inverter as an optional accessory.
2.7.1 Functions of the display and keys
• HMI status LED
• 4-digit 7-segment display
• Returns to the previous
menu or parameter
or increases the
displayed value
• Goes to the next
menu or parameter
or reduces the
displayed value
•
2 status LEDs for
communication
• Exits a menu or a
parameter or returns from
the displayed value to the
last saved value back
•
Displays a menu or a
parameter or saves the
displayed parameter or value
Note:
Pressing ▲ or ▼ does not save the selection.
Press ▲ or ▼ (>2 s) button to quickly scroll through the data.
Save the selection: ENT
If a value is saved, the display flashes.
Normal display (no error and no startup):
•
43.0: Display of the parameter selected in the SUP menu (default value:
motor frequency)
• (CLI) : Current limiting
• (CtL) : Controlled stop in the event of a failure of the input phase
• (dCb) : DC injection is taking place
• (FLU) : Motor magnetizing taking place
• (FSt) : Quick stop
• (nLP) : No power supply. (no mains voltage on L1, L2, L3)
•
(nSt) : Freewheel stop
• (Obr) : Automatically adjusted deceleration.
• (PrA) : Power removal function (safe stop) active (inverter locked)
• (rdY) : Inverter ready for operation
• (SOC) : Controlled output shutdown
• (tUn) : The autotuning is running
• (USA) : Undervoltage alarm
In the event of an error the display flashes.