B&R 5PP551.0573-00, User Manual, Page: 240 / 253

Mounting compatibilities
240 Power Panel 500 User's Manual V 1.00
435 x 430
8.5 PP500
9 PP100/200/300/400/AP900/PPC700
10
9 PP100/200/300/400/AP900/PPC700
8.5 PP500
10
Outer contour of device
Cutout for PP100/200/300/400/AP900/PPC700 device
415 x 412 ±0.5
PP100/200/300/400 AP900
Cutout for PP500 device
415 x 413 ±0.5
PP500
0.
5
0.
5
Image 57: Mounting compatibility - 15" device format - Vertical1
15" Power Panel 500 devices are not 100% mounting compatible with the Power Panel
300/400, Power Panel 100/200, Automation Panel 900 and Panel PC 700 device format Ver-
tical1. The Power Panel 500 devices require a cutout that is 0.5 mm higher (top and bottom
edge).
The larger cutout can can be conditionally used for all devices:
• When mounting, make sure that the PP100/200/300/400, AP900 and PPC700 devices
are placed and mounted as close to the center of the cutout as possible. Failure to do
so can prevent the retaining clips from holding firmly, which means that a firm seal is
no longer guaranteed with the gasket (IP65).