Technical data • Entire device
Secti
on 2
Te
chn
ica
l da
ta
113
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
2.13.12 Ethernet connection ETH2
This Ethernet connection is integrated in the system unit.
Driver support
A special driver is necessary for operating the Intel Ethernet controller 82551ER. Drivers for
Windows XP Professional, Windows XP Embedded, and DOS are available for download on the
B&R Homepage in the download area (
).
Ethernet connection (ETH2
1)
)
1) The interfaces, etc. available on the device or module were numbered accordingly for easy identification. This numbering can differ from
the numbering used by the particular operating system.
Controller
Intel 82551ER
RJ45 twisted pair (10BaseT/100BaseT), female
Cabling
S/STP (Cat5e)
Transfer rate
10/100 MBit/s
2)
2) Both operating modes possible. Change-over takes place automatically.
Cable length
max. 100 m (min. Cat5e)
LED
On
Off
Green
100 Mbit/s
10 Mbit/s
Orange
Link
(Ethernet network
connection
available)
Activity (blinking)
(Data transfer in
progress)
Table 44: Ethernet connection (ETH2)
Information:
Required drivers can only be downloaded from the B&R homepage, not from
manufacturers' pages.
ETH2
green
orange
Summary of Contents for 5PC600.SE00-00
Page 2: ...2 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10...
Page 4: ...4 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10...
Page 6: ...6 Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10...
Page 568: ...568 Appendix A Glossary Automation PC 620 with 945GME N270 CPU board User s Manual V 1 10...