Accessories
Automation Panel 9xD - Hygienic design User's manual V 1.80
135
9.6.2 5MMUSB.032G-02
9.6.2.1 General information
USB flash drives are easily replaceable storage media. Due to the fast data transfer (USB 3.0), USB flash drives
offer optimal values for use as portable storage media. Without additional drivers, the USB flash drive immediately
reports itself as another drive from which data can be read or to which data can be written (hot plugging). USB 3.0
(XHCI) is supported in Windows 7 and later (USB 3.0 driver required).
Information:
Due to the large number of USB flash drives available on the market and their short lifecycles, we
reserve the right to supply alternative products. It may therefore be necessary to take the following
measures in order to also boot from these USB flash drives:
•
The USB flash drive must be reformatted or, in some cases, repartitioned (set partition as ac-
tive).
•
The USB flash drive must be in the first position in the boot sequence; alternatively, the IDE
controllers can be disabled in BIOS. In most cases, this can be avoided by running "fdisk / mbr"
on the USB flash drive.
9.6.2.2 Order data
Model number
Short description
Figure
USB accessories
5MMUSB.032G-02
USB 3.0 flash drive 32 GB MLC
9.6.2.3 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
Model number
5MMUSB.032G-02
General information
Capacity
32 GB
LEDs
1 LED (green)
1)
MTBF
>3,000,000 hours
Type
USB 2.0, USB 3.0
Servicing
None
Certifications
CE
Yes
Interfaces
USB
Type
USB 2.0, USB 3.0
Connection
To any USB type A interface
Transfer rate
High speed (480 Mbit/s) to SuperSpeed (4 Gbit/s)
Sequential reading
USB 3.0 max. 100 MB/s
Sequential writing
USB 3.0 max. 50 MB/s
Endurance
MLC flash memory
Yes
Data reliability
<1 unrecoverable error per 10
14
bits read
Mating cycles
>1500
Electrical properties
Current consumption
Max. 67 mA in sleep mode, max. 122 mA read, max. 141 mA write
Ambient conditions
Temperature
Operation
0 to 70°C
2)
Storage
-55 to 95°C
Transport
-55 to 95°C
Relative humidity
Operation
10 to 95%, non-condensing
Storage
10 to 95%, non-condensing
Transport
10 to 95%, non-condensing
