B&R Industries X20 System, User Manual

Page: 636 / 2720

X20 system modules • Compact CPUs System modules • X20PS9500
636 X20 system User's Manual 3.10
Product ID X20PS9500
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical characteristics
Note Order 1x X20TB12 terminal block separately
Order 1x X20BB22 or X20BB27 compact CPU base separately
Order 1x X20BB3x/4x fieldbus CPU base separately
Spacing 12.5
+0.2
mm
Table 218: X20PS9500 - Technical data
1) CAN bus only when used with the X20BB27, X20BB37 or X20BB47 bus module.
2) The specified values are maximum values. The calculation is also available for download as a data sheet with the other module documentation on the B&R
website.
3) In parallel operation, only 75% of the rated power can be assumed. It is important to make sure that all power supplies operating in parallel are switched
on and off at the same time.
4.10.4.4 LED status indicators
Figure LED Color Status Description
Off No power to module
Single flash RESET mode
Blinking PREOPERATIONAL mode
r Green
On RUN mode
Off No power to module or everything OK e Red
Double flash LED indicates one of the following states:
•
The CPU / X2X Link supply for the power supply is overloaded
• I/O supply too low
•
Input voltage for CPU / X2X Link supply too low
e + r Red on / Green single flash Invalid firmware
Off The CPU / X2X Link supply is within the valid limits l Red
On The CPU / X2X Link supply for the power supply is overloaded
Off The CPU does not send data via the RS232 interface. S Yellow
On The CPU sends data via the RS232 interface.
Off The CPU is not sending data via the CAN bus interface. C Yellow
On The CPU is sending data via the CAN bus interface.
Off The terminating resistor integrated in the BB27 or BB37 bus module is turned off. T Yellow
On The terminating resistor integrated in the BB27 or BB37 bus module is turned on.
Table 219: LED status indicators
4.10.4.5 Pinout
X
20
P
S
9
50
0
GND
+24 V I/O
+24 V I/O
GND
+24 V CPU/X2X L.
+24 V CPU/X2X L.
I
r e
S
C T
RS232 TxD
CAN GND
CAN high
RS232 RxD
RS232 GND
CAN low
Figure 254: Pinout